TOUGHBUILT TB-H2-LM-165-BT Instrucciones De Funcionamiento página 21

L 0 0
0/32 IN
FT
W
H
H
L
W
+ 0.0°
7. After the new measurement is taken, the
Height Active Measurement, corresponding
Icon Arrow and Labels will briefly flash
yellow, then turn white. The third edge
of the Volume cuboid is now defined. At the
bottom of the screen, the Volume value will
appear, briefly flash yellow, then turn white.
The Save Arrow (Green, right-facing arrow)
will also appear.
8. To save the Volume value, press the Right
Button
that the Volume Measurement has been saved
and will be available in the Memory Menu.
L 8 1
FT IN
W 11 9
1/2 IN
FT
H 157 10
FT
L
15 051.7
,
9. To begin measuring a new Volume, press
the Action Button
return to step 2.
10. To add or subtract another Volume
Measurement from the current Volume
value, press the Up Button
Down Button
the Volume Calculator instructions below.
To use the Volume Calculator:
1. The previous Volume value will be
displayed at the top of the screen. Below
this will be the selected mathematical
function, either a plus or a minus. This
function can be changed at any point by
pressing the Up Button
whichever is active. Below the function, the
Length "L" Measurement and corresponding
Icon Arrow will blink until a measurement is
taken by laser-marking the desired target,
then pressing the Action Button
2. After the new measurement is taken, the
Length Active Measurement, corresponding
Icon Arrow and Labels will briefly flash
yellow, then turn white.
3. Now the Width "W" Active Measurement and
corresponding Icon Arrow will blink until a
measurement is taken by laser-marking the
L 8
W 0
H
L
+ 0.0°
2
. An overlay will appear displaying
31/32 IN
+
H
W
FT3
2
to subtract and proceed to
1
FT IN
0
0/32 IN
FT
H
W
3
. The screen will
2
2
or Down Button
L 8 1
FT IN
W 11 9
1/2 IN
FT
H 0 0
0/32 IN
FT
L
W
+ 90.0°
to add or the
3
.
H
2
,
21