TOUGHBUILT TB-H2-LM-165-BT Instrucciones De Funcionamiento página 34

3. After the new measurement is taken, the
Diameter Measurement and corresponding
Icon Arrow will briefly flash yellow, then turn
white.
4. The Height Measurement and corresponding
Icon Arrow will blink until a measurement is
taken by laser-marking the desired target,
then pressing the Action Button
5. After the new measurement is taken, the
Height Measurement and corresponding
Icon Arrow will briefly flash yellow, then turn
white. At the bottom of the screen, the
Cylinder Volume value will appear, briefly
flash yellow, then turn white. The Save
Arrow (Green, right-facing arrow) will
also appear.
D 7 8
5/16 IN
FT
H 12 11
5/32 IN
FT
D
600.8
FT3
6. To save the Cylinder Volume value, press
the Right Button. An overlay will appear
displaying that the Cylinder Volume
Measurement has been saved and will be
available in the Memory Menu.
7. To take additional measurements, press
the Action Button
Measurement will be zeroed and blink
and the other values will be cleared; then
return to step 2.
LEVEL MEASUREMENT
This mode allows the user to take Linear and
Bull's-eye Level Measurements.
To enter Level Measurement Mode:
1. Press the Menu Button
will be displayed.
2. Use the Up Button or Down Button
34
D
H
H
600.8
7 8
5/16 IN
FT
12 11
5/32 IN
FT
D
H
FT3
3
. The Diameter
5
. The Main Menu
3
.
2
to