TOUGHBUILT TB-H2-LM-165-BT Instrucciones De Funcionamiento página 16

highlight the Length option.
5. Select the Length Measurement Mode
by pressing the Action Button
Right Button
To use Length Measurement Mode:
1. The Length Measurement Mode will be
displayed on the screen and the laser
will be armed as indicated by the Laser
ON Indicator
2. The Active Measurement will blink until
a measurement is taken by laser-marking
the desired target, then pressing the
Action Button
3. After the new measurement is taken, the
Active Measurement will briefly flash yellow,
then turn white. The Save Arrow (Green,
right-facing arrow) will appear on the right
side of the screen, midway up.
4. To save the Active Measurement, press
the Right Button
appear displaying that the Length
Measurement has been saved and will be
157 10
FT
available in the Memory Menu.
+
57 10
FT
157
FT
+
57
FT
215
9
15/16
15/16
5. To take additional measurements, press the
Action Button
will be zeroed and blink; return to step 2.
Up to three previous measurements will be
retained below the Active Measurement.
6. To add or subtract another Length
Measurement from the mathematical result,
press the Up Button
Button
Length Calculator instructions below.
16
2
MODE
BLUETOOTH
UNITS
ZERO POINT
BRIGHTNESS
SOUND
LANGUAGE
MEMORY
7
3
157
10
+
31/32 IN
31/32 IN
10
31/32 IN
10
31/32 IN
+
FT
FT
IN
3
IN
2
to subtract and proceed to the
.
.
.
FT
31/32
IN
MAX 164 11
30/32 IN
FT
MIN 24 11
5/8 IN
FT
42.5°
2
. An overlay will
+
. The Active Measurement
2 to add or the Down
3 or