TOUGHBUILT TB-H2-LM-165-BT Instrucciones De Funcionamiento página 28

6. As you approach each Interval Distance, it
will be represented by a yellow, pointed bar
displaying the instance number and the
Interval Distance. This bar will move
dynamically across the screen and markings
should be made in-line with its points.
13x
7
10
102 10
19/32 IN
FT
+ 0.0°
CLEAR
7. To change the Interval Distance, press the
Left button
Distance Screen and repeat step 1.
8. To clear and set a new Overall Distance,
press the Down Button
prompted to either Clear the Overall Distance
or Cancel to return to the previous screen.
Use the Up Button
highlight the desired option, then use the
Action Button
to confirm the Clear, return to step 2.
TRAPEZOID (1) MEASUREMENT
This mode allows the user to take three
measurements to define one base and two legs
of a right trapezoid, and calculates the length
and angle of the top base edge.
To enter Trapezoid (1) Measurement Mode:
1. Press the Menu Button
will be displayed.
2. Use the Up Button or Down Button
highlight the Mode option.
3. Select the Mode option by pressing the
Action Button
4. Use the Up Button
highlight the Trapezoid (1) option.
5. Select the Trapezoid (1) Measurement Mode
by pressing the Action Button
Button
To use Trapezoid (1) Measurement Mode:
1. The Trapezoid (1) Measurement Mode will
be displayed on the screen and the laser
will be armed as indicated by the Laser ON
Indicator
28
FT
31/32 IN
2
2
.
MODE
BLUETOOTH
UNITS
ZERO POINT
BRIGHTNESS
SOUND
LANGUAGE
MEMORY
7 .
7
12.6x
FT
10
31/32 IN
99 8
19/32 IN
FT
+ 0.0°
CLEAR
to return to the Interval
2
2
or Down Button
3
to select it. After choosing
5
3
or Right Button
2
or Down Button
12x
94
FT
+ 0.0°
. You will be
. The Main Menu
2
2
.
3
or Right
HEIGHT 2PT.
STAKE OUT
TRAPEZOID
(1)
TRAPEZOID (2)
CIRCLE AREA
L
11
5/8 IN
CLEAR
2
to
to
2
to