TOUGHBUILT TB-H2-LM-165-BT Instrucciones De Funcionamiento página 32

To enter Circle Area Measurement Mode:
1. Press the Menu Button
will be displayed.
2. Use the Up Button or Down Button
highlight the Mode option.
3. Select the Mode option by pressing the
Action Button
4. Use the Up Button or Down Button
highlight the Circle Area option.
5. Select the Circle Area Measurement
Mode by pressing the Action Button
or Right Button
To use Circle Area Measurement Mode:
1. The Circle Area Measurement Mode will
be displayed on the screen and the laser
will be armed as indicated by the Laser
ON Indicator
2. The Diameter Measurement and
corresponding Icon Arrow will blink until
a measurement is taken by laser-marking
the desired target, then pressing the Action
Button
3. After the new measurement is taken,
the Diameter Measurement and
corresponding Icon Arrow will briefly flash
yellow, then turn white. At the bottom of the
screen, the Circle Area value will appear,
briefly flash yellow, then turn white. The
Save Arrow (Green, right-facing arrow) will
also appear.
4. To save the Circle Area value, press the
Right Button
displaying that the Circular Area Measurement
has been saved and will be available in the
Memory Menu.
32
3
2
MODE
BLUETOOTH
UNITS
ZERO POINT
BRIGHTNESS
SOUND
LANGUAGE
MEMORY
7
.
3
.
2
. An overlay will appear
5
. The Main Menu
or Right Button
.
TRAPEZOID (1)
TRAPEZOID (2)
CIRC. AREA
CYLINDER VOLUME
LEVEL
2
to
2
.
2
to
3
D