TOUGHBUILT TB-H2-LM-165-BT Instrucciones De Funcionamiento página 22

desired target, then pressing the Action
Button
4. After the new measurement is taken, the
Width Active Measurement, corresponding
Icon Arrow and Labels will briefly flash
yellow then turn white.
5. Now the Height "H" Active Measurement and
corresponding Icon Arrow will blink until a
measurement is taken by laser-marking the
desired target then pressing the Action
Button
6. After the new measurement is taken, the
Height Active Measurement, corresponding
Icon Arrow and Labels will briefly flash
yellow, then turn white. At the bottom of the
screen, the mathematical Result will briefly
flash yellow, then turn white. The Save
Arrow will also appear.
7. To save the mathematical Result, press
the Right Button
displaying that the Area Measurement has
been saved and will be available in the
Memory Menu.
8. To exit the Volume Calculator and return
to measuring individual Volumes, press
the Action Button
9. To add or subtract another Volume
Measurement from the mathematical Result,
press the Up Button
Button
LENGTH (CALC.) MEASUREMENT
This mode allows the user to laser-mark a
target and calculates the horizontal length
between the unit and the target.
To enter Length (Calc.) Measurement Mode:
1. Press the Menu Button
will be displayed.
2. Use the Up Button
highlight the Mode option.
3. Select the Mode option by pressing the
Action Button
4. Use the Up Button
highlight the Length (Calc.) option.
5. Select the Length (Calc.) Measurement
Mode by pressing the Action Button
Right Button
22
3
.
3
.
2
2
to subtract and return to step 1.
+
Screen Display
3
or Right Button
2
.
. An overlay will appear
3
.
2
to add or the Down
5
. The Main Menu
2
or Down Button
2 or Down Button
2
to
2
.
2 to
3
or