TOUGHBUILT TB-H2-LM-165-BT Instrucciones De Funcionamiento página 29

2. The first Active Measurement, a vertical leg,
and corresponding Icon Arrow will blink until
a measurement is taken by laser-marking
the desired target, then pressing the Action
Button
3. After the new measurement is taken, the
Active Measurement will briefly flash yellow,
then turn white.
4. Now the second Active Measurement, a
horizontal base, and corresponding Icon
Arrow will blink until a measurement is
taken by laser-marking the desired target,
then pressing the Action Button
5. After the new measurement is taken, the
Active Measurement will briefly flash yellow,
then turn white.
6. Now the third Active Measurement, a
vertical leg, and corresponding Icon Arrow
will blink until a measurement is taken by
laser-marking the desired target, then
pressing the Action Button
7. After the new measurement is taken, the
Active Measurement and corresponding
Icon Arrow will briefly flash yellow, then
turn white. At the bottom of the screen, the
Trapezoid (1) value will appear, briefly flash
yellow, then turn white. The Save Arrow
(Green, right-facing arrow) will also appear.
3
.
3
.
3
.
29