TOUGHBUILT TB-H2-LM-165-BT Instrucciones De Funcionamiento página 19

8. To add or subtract another Area Measurement
from the current Area value, press the Up
Button
subtract, then proceed to the Area Calculator
instructions below.
To use the Area Calculator:
1. The previous Area value will be displayed
at the top of the screen. Below it will be
the selected mathematical function, either
a plus or a minus. This function can be
changed at any point by pressing the
Up Button or Down Button
is active. Below the function, the Length
Measurement and corresponding Icon
Arrow will blink until a measurement is
taken by laser-marking the desired target,
then pressing the Action Button
2. After the new measurement is taken,
the Length "L" Active Measurement,
corresponding Icon Arrow and Labels will
briefly flash yellow then turn white. The first
edge of the Area rectangle is now defined.
3. Now the Width "W" Active Measurement and
corresponding Icon Arrow will blink until
a measurement is taken by laser-marking
the desired target then pressing the Action
Button
4. After the new measurement is taken, the
Width Active Measurement, corresponding
Icon Arrow and Labels will briefly flash
yellow then turn white. The second edge
of the Area rectangle is now defined. At the
bottom of the screen, the mathematical
Result will briefly flash yellow then turn
white. The Save Arrow will also appear.
5. To save the mathematical Result, press
the Right Button
displaying that the Area Measurement
has been saved and will be available in
the Memory Menu.
6. To exit the Area Calculator and return to
measuring individual Areas, press the
Action Button
7. To add or subtract another Area Measurement
from the mathematical Result, press the
Up Button
to subtract and return to step 1.
2 to add or the Down Button
3
.
2
3
.
2
to add or the Down Button
Screen Display
2
, whichever
. An overlay will appear
2 to
3
.
2
19