Fastening The Child Into The Child Seat - Babyauto more KIDE 01 Manual De Instalación

5.2 FASTENING THE CHILD INTO THE CHILD
SEAT
The correct adjustment of the headrest ensures that
the child is properly fastened into the car seat. The
headrest must be adjusted so that the harness (which
moves with the headrest) is at shoulder height on the
child or slightly above, but never behind the back or at
ear level (fig. 1).
1. Pull the headrest height adjuster (08) and move it
to shoulder height in accordance with the size of
the child (fig. 2).
2. Loosen the harness straps by stretching the
chest section while holding down the harness
adjustment button (11) (fig. 3).
3. Open the buckle (10) so that the child can be
placed into the seat. The harness straps can be
placed on the armrest (fig. 4)
4. Place the child into the seat.
5. Fit the safety harness around the child, using the
buckle (10) to fasten the two parts together until
you hear a "click" (fig. 5).
6. Stretch the harness adjustment belt in order to
give the harness the correct amount of tension
(12). Remember that in order to guarantee the
child's safety, harnesses must be well-tightened
(fig. 6).
24
All manuals and user guides at all-guides.com
fig. 1
fig. 3
fig. 5
CLICK
fig. 2
fig. 4
fig. 6