Adjusting The Seat; Recline Positions - Babyauto more KIDE 01 Manual De Instalación

2. Loosen the harness straps by stretching the
chest section while holding down the harness
adjustment button (10) (fig. 3).
3. Open the buckle (09) so that the child can be
placed into the seat. The harness straps can be
placed on the armrest (fig. 4)
4. Place the child into the seat.
5. Fit the safety harness around the child, using the
buckle (09) to fasten the two parts together until
you hear a "click" (fig. 5).
6. Stretch the harness adjustment belt in order to
give the harness the correct amount of tension (11).
Remember that in order to guarantee the child's
safety, harnesses must be well-tightened (fig. 6).

7. ADJUSTING THE SEAT

7.1 Recline positions

1. In order to make the child as comfortable as
possible, the seat can be reclined by pulling the
lever (12) under the front part of the seat. Keep
the lever pressed down as you recline the seat,
releasing it when the seat is in the desired position
(fig. 1 and 2).
All manuals and user guides at all-guides.com
fig. 3
fig. 5
CLICK
fig. 1
fig. 4
fig. 6
fig. 2
1
2
3
27