Fastening The Child Into The Seat - Babyauto more KIDE 01 Manual De Instalación

6.1.3 Installing the Top Tether
1. Take the Top Tether (01) and, if required, lengthen
the belt by pressing the Top Tether brake button
(02) to release the strap, pulling to adjust as
necessary (fig. 1).
2. Attach the Top Tether hook to the Top Tether
anchorage point which is recommended in the
owner's manual for your car (fig. 2).
Look for this symbol in
your vehicle.
3. To tension the Top Tether (01), remove any slack
by pulling on the free end of the strap until it is
suitably tightened (fig. 3). The Top Tether will be
properly tightened when the tension indicator
turns completely green (fig. 4).
6.2 FASTENING THE CHILD INTO THE CAR SEAT
The correct adjustment of the headrest ensures that
the child is properly fastened into the car seat. The
headrest must be adjusted so that the harness (which
moves with the headrest) is at shoulder height on the
child or slightly above, but never behind the back or at
ear level (fig. 1).
1. Pull the headrest height adjuster (07) and move it
to shoulder height in accordance with the size of
the child (fig. 2).
26
All manuals and user guides at all-guides.com
fig. 1
fig. 3
fig. 1
fig. 2
fig. 4
fig. 2