Kia Sorento 2011 Manual Del Usuario página 979

Second Generation XM (2011-2015) / Kia Sorento XM 2011-2015 Service Manual / Brake System
Kia Sorento: Brake System - ESC(Electronic Stability Control) System - Yaw-rate and G Sensor Installation
1. Remove the ignition key from the vehicle.
2. Install inthe reverse order of removal.
After installing the SRSCM, confirm proper system operation:
A. Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.
SRSCM is sensing the vehicle rollover. SAB, CAB, BPT will be able to expanse if mechanic moves the SRSCM on vehicle during IGN ON state. For this
A. reason, turn the IGN OFF surely and then remove the SRSCM from vehicle.
If the SRSCM is replaced always perform variant coding. Also, perform the lateral G sensor calibration. (Refer to Restraint "SRS Control Module")
B.
3.
www.bestservicemanual.com