Second Generation XM (2011-2015) / Kia Sorento XM 2011-2015 Service Manual / Brake System
Kia Sorento: Brake System - Rear Disc Brake Replacement
1. Remove the rear wheel & tire.
Loosen the guide rod bolt (B) and pivot the caliper (A) up out of the way.
2.
Replace pad shim (D), pad retainers (C) and brake pads (B) in the caliper carrier (A).
3.
Compress the piston into the caliper body using the SST (09581-11000).
4.
Place the caliper body (A) on the caliper carrier and tighten the guide rod bolt (B).
Tightening torque:
21.6 ~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~ 23.1 lb-ft)
5.
Install the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
6.
www.bestservicemanual.com