Kia Sorento 2011 Manual Del Usuario página 943

Second Generation XM (2011-2015) / Kia Sorento XM 2011-2015 Service Manual / Brake System
Kia Sorento: Brake System - Parking Brake System - Parking Brake Lever Assembly Removal
The parking brake cables must not be bent or distorted. This will lead to stiff operation and premature failure.
Remove the floor console assembly. (Refer to Body
1. - "Floor console")
Disconnect the connector (A) of parking brake switch.
2.
Loosen the adjusting nut (A) and the parking brake cables (B).
Parking brake lever in the car must be in fully loosened position.
3.
Remove the parking brake lever assembly (A) after removing the bolts.
4.
www.bestservicemanual.com