Registration; Ground Rules; Ns7 / V7 Platter Assembly - Numark NS7 Manual De Referencia

REGISTRATION

Please go to http://www.numark.com to register your NS7 / V7 / NSFX. Registering your product ensures that we can keep you up-
to-date with any last-minute product developments and provide you with world-class technical support, should you run into any
problems.

GROUND RULES

READ SAFETY INSTRUCTIONS & WARRANTY INFORMATION BEFORE USING THE PRODUCT.
Make sure all items listed in BOX CONTENTS are included.
Before getting started and connecting devices to NS7 / V7 or turning NS7 / V7 on/off, make sure all devices are off and all faders
and gain knobs are set to "zero."
READ AND FOLLOW THE SOFTWARE & DRIVER INSTALLATION INSTRUCTIONS.

NS7 / V7 PLATTER ASSEMBLY

1. Remove NS7 / V7 from the
packaging. Remove the
platter assembly/assemblies
from package.
Place NS7 / V7 on a flat,
stable surface for operation.
Ensure unit has adequate air
flow to all ventilation ports
(especially if installed in a
case).
2. Place the platter onto NS7 / V7 by aligning the pins in the bottom of the platter with the holes in NS7's / V7's
motor.
3. Place the slipmat onto the platter, then place the vinyl over the slipmat.
4. Line up the notch in the spindle with the screw in the vinyl's 45 RPM adapter. Use the allen wrench
(included) to tighten the screw, locking the platter assembly to the spindle.
All manuals and user guides at all-guides.com
1