Software Installation; Connecting The Ns7 / V7 - Numark NS7 Manual De Referencia

SOFTWARE INSTALLATION

Free updates to the Serato ITCH software are available online at http://www.serato.com/itch. We recommend checking the website
for the latest update of Serato ITCH before installing it on your computer.
WINDOWS (XP & VISTA)
1. IMPORTANT: Do NOT connect the NS7 / V7 to your PC before you are prompted to do so. The installer will prompt you to
connect it at the appropriate time.
2. Insert the included software CD into your computer's CD-ROM drive. An installation "wizard" will appear. (If it does not appear,
open the contents of the software CD and double-click the "ITCH_Installer.exe" file.)
3. Follow the instructions on the screen to begin the installation process. During this process, you will be prompted to connect the
NS7 / V7 to your computer. Throughout the installation:
if Windows warns you that any of the drivers' certificates cannot be verified, approve them anyway.
if Windows warns you that the hardware installation was not successful or may not work properly, ignore it.
if you see any dialog boxes flash briefly on the screen before disappearing, ignore them.
These warnings are normal and are simply Windows' reaction to the cancellation of its own hardware installer. (NS7 / V7 and
Serato ITCH use their own installation processes.)
If you selected the default location during the installation process, you can find the program in the following location:
XP: Start Menu Programs
Vista: Windows Menu
MAC
1. Insert the software CD (included) into your computer's CD-ROM drive.
2. Open the contents of the software CD in your computer.
3. Double-click the ITCH Installer file.
4. Follow the instructions on the screen to begin the installation process. During this process, you will be prompted to connect the
NS7 / V7 to your computer.
If you selected the default location during the installation process, you can find the program in your Applications folder.

CONNECTING THE NS7 / V7

1. NS7: Connect any optional input sources (microphones, turntables, CD players, etc.) to NS7.
2. Connect output devices (power amplifiers, sub-mixer, recorders, etc.) to NS7 / V7.
3. Plug all devices into power supply, and turn on devices in proper order:
a. When starting a session, turn devices on in this order: (1) auxiliary input sources, (2) NS7 / V7, (3) output devices
b. When ending a session, reverse this operation by turning off: (1) output devices, (2) NS7 / V7, (3) auxiliary input sources
4. Connect NS7 / V7 to your computer with the USB cable (included) and to your headphones.
5. Start Serato ITCH and go!
All manuals and user guides at all-guides.com
ITCH
All Programs Serato ITCH
2