Husqvarna TC 2011 I.E. Serie Manual Del Usuario página 103

To replace the parking light bulb (8) extract it from the
inside cover.
Once the bulb has been replaced, reverse the above pro-
cedure to reassemble.
8
TURNING INDICATOR BULB REPLACEMENT (TE)
- Loosen screw (1) using a Phillips screwdriver;
- remove lens (2) and replace bulb (3) pushing it inside,
and turning it to remove it;
Once the bulb has been replaced, reverse the above pro-
cedure to reassemble.
3
TAIL LIGHT (TE)
The tail light (1) is a LED light.
1
2
1
EN - 49