Annex - Ottobock 12K42 ErgoArm plus Instrucciones De Uso

Annex

Switching modes 12K50
When the battery is inserted, the current
switching mode is indicated by vibration
feedback signal.
Switching
Lock
mode
Press the switch ➜ release = lock
1 white
Press the switch ➜ release = unlock
Co-contraction = lock
2 red
Co-contraction = unlock
Press and hold down switch = elbow mode
3 green
Release the switch = Hand mode
Press the switch ➜ release= elbow mode
4 blue
Press the switch ➜ release = hand mode
Press the switch ➜ release= elbow mode
5 yellow
10 s no electrode signal = hand mode
or press the switch ➜ release = hand mode
Co-contraction = elbow mode
6 magenta
Co-contraction = hand mode
Co-contraction = elbow mode
7 orange
10 s no electrode signal = hand mode
or co-contraction = hand mode
Vibration feedback signal for successful switching over
between hand and elbow is activated in Programs 3 – 7.
1x vibration = hand mode (the hand is controlled by electrode signals)
2x vibration = elbow mode (the elbow is controlled by electrode signals)
Electrode OPEN = unlock
Electrode CLOSE = lock
Electrode OPEN = unlock
Electrode CLOSE = lock
Electrode OPEN = unlock
Electrode CLOSE = lock
Electrode OPEN = unlock
Electrode CLOSE = lock
Electrode OPEN = unlock
Electrode CLOSE = lock
Four Channel
Processor II
SLIP-STOP
NO All switching modes
Only Program 1 (white)
Four-channel Control
NO or
Program 9
Adjustment Cap
YES
YES
All switching modes
YES
YES
Only Program 1 (white)
Four-channel Control
or
Program 9
Adjustment Cap
YES
Hand
All versions
All versions with
2 electrodes
Not
recommended
for hands with
Digital or
Digital-Twin
Control System
49