Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING GUIDE
Problem: The display comes on but
only the Time function Works.
Solution:
a.-Make sure that the connection
cable is connected.
Problem: The display does not come
on or the displayed segments are
very weak.
Solution:
a.-Check that the batteries are fi tted
correctly.
b.-Check the battery charge.
c.- If they are run down change the
batteries.
Problem: Display segments of a
function read-out are not visible or
error
messages
function appear.
Solution:
a.-Remove
the
seconds and then refit them correctly.
b.-Check the battery charge If they
are run down change the batteries.
c.- If the above steps do not help then
replace the electronic monitor.
for
a
particular
batteries
for
(6V Transformer)
Problem: The monitor does not
switch on.
Solution:
a.-Check the 220 V mains connection
b.-Check the output connection from
the transformer to the monitor.
c.-
Check
connections.
d.-Check the cable connections for
the main post..
Avoid leaving the electronic monitor
in direct sunlight as
damage the liquid crystal display.
Similarly, do not expose it to water or
knocks.
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE
Do not hesitate to get touch with us if
15
you have any queries, by calling:
+44 0844 335 3988
service@bh-uk.co.uk
14
the
monitor
this might
cable
Publicidad
