Cub Cadet 17BICBDT603 Instrucciones De Funcionamiento Originales página 18

Operating Manual
Problem
Engine emits smoke.
Excessive vibration.
Cutting mechanism does
not discharge grass or cuts
unevenly.
Engine is running, cutter
deck is not mowing.
Possible cause(s)
Too much oil in engine.
Engine defective.
Damaged blade drive shaft or
defective cutting blade.
Engine speed too low.
Travelling speed too high.
Cutting blade is blunt.
V-belt torn.
Remedy
Switch off engine immediately.
Check engine oil level.
Switch off engine immediately. Arrange for
service agent to check the engine.
Switch off engine immediately.
Have defective parts replaced.
Increase throttle.
Set to a lower travelling speed.
Arrange for service agent to sharpen or
replace blade.
Have the V-belt replaced in a repair shop.
English
15