Test Mode; Standby Mode - Roger Technology B70/1B Instrucciones Y Advertencias Para El Instalador

• TEST mode

on the display.
door has reached the door open limit switch
for the next device is displayed. Any further alarm states are also displayed with the same logic.
After 10 seconds with no user input, the display returns to command and safety device state display mode.

• Standby mode

, + or - to reactivate the control unit.
POWER
38
or is shown on the display to indicate that the overhead
or door closed limit switch
STOP.
Sensing edge
Photocell
Both limit switches
Door open limit switch
Door closed limit switch
.