Setting Motor Stop Distance - Roger Technology B70/1B Instrucciones Y Advertencias Para El Instalador

Photocell (FT1) mode with door closed
If the photocell is obstructed, the door cannot open.
The door opens when an open command is received, even if the photocell is obstructed.
The photocell sends the door open command when obstructed.
Enable close command 6 s after activation of photocell (FT1)
Disabled.

Setting motor stop distance

Contact with 8k2 resistor. The door reverses only when closing.
Contact with 8k2 resistor. The door always reverses.
STOP.
Courtesy light. The output COR is managed from the remote control. The light remains lit as long as
the remote control is active. The parameter
The remote control turns the courtesy light on and off. The parameter
•
Selecting courtesy light mode
Disabled.
From 3 to 90 s. The light remains lit for the time period set after the manoeuvre is completed.
From 2 to 9 minutes. The light remains lit for the time period set after the manoeuvre is completed.
and set:
is ignored.
is ignored.
45