030 Function
040 Service activities
Note
Unless otherwise described, the installation takes place in
reverse order.
AFAR Uninstall/ install deflection rollers suction bar
28
English 9.808-230.0 Rev. 01 (03/20)
1 Sucked in air from the suction bar
2 Sealings
3 Air outlet brush motor
4 Air outlet suction turbine
5 Suction turbine
The way of the process air must not be blocked.
Dirt or sucked in objects must be removed regularly.
The link air outlet suction turbine is decisive for a low noise
level.
The suction turbine must not draw any fluid. For this rea-
son, the function of the float must be checked regularly and
the use of non-foaming detergents must be ensured.
1 Turning handle
2 Screw opening
After adjusting the suction bar inclination via the twist grip,
it can be secured with a screw so that it does not change
during the operation.
1 Star handle screw
2 Scraper roller of suction bar
Unscrew the star-knob screw.
Remove deflection roller suction bar.