1 Suction turbine air channel
2 Seal float
Remove the air channel suction turbine.
Remove the seal of the float.
Installation information
Pay attention to the correct fitting position during reinstal-
lation.
ADWD Uninstall / install water dosing valve
1 Square with regulating knob water volume
2 Cover
Remove cover.
Remove square with regulating knob water volume.
1 Support
2 Screws
Unscrew the screws.
Remove the holders.
1 Water dosing valve
2 Seal
Remove the water dosing valve.
Installation information
Pay attention to the correct fitting position during reinstal-
lation.
22
English 9.808-230.0 Rev. 01 (03/20)