Akmw Uninstall / Install Shaft Seal Brush Motor; Akre Uninstall / Install Deflector Roller; Aksa Uninstall / Install Retainer Disc Brush - Kärcher BD 50/50 C Bp Classic Instrucciones De Servicio

AKMW Uninstall / install shaft seal brush motor

AKRE Uninstall / install deflector roller

AKSA Uninstall / install retainer disc brush

58
English 9.808-230.0 Rev. 01 (03/20)
 AKMG Uninstall / install brush motor
Diagram
BD 50/60 C Ep Classic
1 Screws
2 Shaft seal ring
3 Outer ball bearing
4 Inner ball bearing
5 Cover
 Unscrew the screws.
 Remove the lid.
 Remove ball bearing.
 Remove shaft seal.
Component Description
Shaft seal ring NAK 151C TC 25 35 7
 AKBE Uninstall / install disc brush
1 Screws
2 Plate
3 Scraper roller
 Lift the front of the appliance and support it.
 Pull off the splash guard in the area of the deflector roll-
er.
 Unscrew the screws.
 Remove metal sheet.
 Remove the scraper roller.
 AKBE Uninstall / install disc brush
 AEAA Lay the device on its side for maintenance work
1 Screw
2 Retainer disc brush
 Loosen screws.