Akbe Uninstall / Install Disc Brush; Akbs Uninstall / Install Bracket Disc Replacement - Kärcher BD 50/50 C Bp Classic Instrucciones De Servicio

AKBE Uninstall / install disc brush

AKBS Uninstall / install bracket disc replacement

1 Retaining rings
2 Axle
3 Contact roller brush plate
 Remove the retaining rings.
 Pull out axle.
Installation information
Pay attention to the correct fitting position during reinstal-
lation.
1 Disc brush
2 Handle disc replacement
 Push down the device holding the push handle so that
the cleaning head is raised.
 Push down the bracket disc replacement using your
foot.
 Pull the device towards the back so that the disc brush
becomes accessible.
 AKBE Uninstall / install disc brush
 AEAA Lay the device on its side for maintenance work
 AKBW Uninstall/ install cleaning head
 AKBT Uninstall / install spring bracket disc replacement
1 Screws
2 Retaining plates
3 Handle disc replacement
4 Clamp
 Unscrew the screws.
 Remove the retaining plates.
 Remove the bracket disc replacement.
 Reinstall clamp.
English 9.808-230.0 Rev. 01 (03/20)
53