030 Function
040 Service activities
Note
Unless otherwise described, the installation takes place in
reverse order.
AKAT Uninstall / install contact roller brush plate
52
English 9.808-230.0 Rev. 01 (03/20)
Air duct for the brush motor cooling air
Cold air (green arrows)
–
Warmed air (orange arrows)
–
The outlet and inlet for the cooling air must always be kept
clear in order to avoid overheating.
AKBE Uninstall / install disc brush
1 Contact roller brush plate
2 Screws
Lift the front of the appliance and support it.
Pull off the splash guard in the area of the contact roller
brush plate.
Unscrew the screws.
Remove contact roller brush plate.