REMS Akku-Press 22 V ACC Connected Instrucciones De Servicio página 23

eng
Main window
Bottom toolbar
Welcome and start page
Messages
Messages are displayed when switching the drive unit on if the event has occurred.
Start page
Alternating displays: Welcome and start page, menus, sub-menus, setup and information pages, messages
Show next menu
Show menu, next sub-menu or setup page
Open previous menu/sub-menu
Cancel/Exit/Show pressure-time diagram/Reset counter
Increase counter value
Next line
Symbol lights permanently: Confirm entry
Symbol flashes: Access-Point of the drive unit is activated and ready for connection to the mobile terminating device.
Voice recording
Install new firmware version.
Welcome page with manufacturer logo
Firmware version
Start page
Date, time, type of drive unit
Drive unit ready for operation
Annual inspection and periodic testing
Is displayed when annual inspection and periodic testing is due (≤ 0 d or ≥ 30,000 n).
Memory full
The stored data will be overwritten from now on (oldest data first).
Usage bar
Number of days d remaining until drive unit is locked
Number of pressings n remaining until drive unit is locked
Usage bar A
Display QR code in the OLED display with the right button. Scan the QR code with the mobile terminating device and
change the usage bar of the drive unit in the REMS Service Portal.
eng
23