Descargar Imprimir esta página

Work Environment Conditions; Fixing To The Ground; Electrical Hook-Up - Mondolfo Ferro TBE155 Manual De Uso

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

WARNING
If the machine is installed outdoors, it must
be properly sheltered under a roof.

Work environment conditions

- Relative humidity: 30-95% without condensa-
tion
- Temperature range: 0° - +55°
WARNING
Use of the machine in a potentially explosive
atmosphere is not permitted.

Fixing to the ground

It is not necessary to anchor the machine to the
ground, which must simply not be uneven to
permit the platform wheels to slide easily.
If the machine is to be fixed to the ground,
use M16 expansion plugs in the areas indicated
in Fig. 6.
42

ELECTRICAL HOOK-UP

The tyre changer must be powered with
three-phase current plus a neutral wire. The
power supply voltage must be specified in the
purchase order.
WARNING
All operations required for the electrical con-
nections of the equipment must be carried
out exclusively by a qualified electrician.
- The dimensions of the electric hook-up used
must be suitably sized in relation to:
• absorbed power specifications indicated on
the machine data plate;
• the distance between the machine and the
power supply hook-up point, so that voltage
drops under full load do not exceed 4% (10%
during start-up) compared with the rated
voltage specified on the data plate.
- The user must:
• fit a power plug that complies with the
relevant electrical safety standards;
• connect the machine to its own electrical
connection fitted with a suitable differential
circuit breaker;
• mount power line protection fuses, suitably
sized according to the specifications indi-
cated on the main wiring diagram contained
in this manual;
• install an efficient grounding circuit to
protect the workshop electrical system.
- To prevent unauthorised use of the machine,
always disconnect the power supply plug
when the machine is not used (switched off)
for extended periods of time.
-
If the machine is connected directly to the
power supply by means of the main electri-
6
cal board without a separate plug, install
a key-operated switch (or at least a switch
that can be locked) to restrict machine use
to authorised personnel only.
WARNING
For the correct functioning of the machine
it is vital to have a good ground connection.
NEVER connect the machine ground wire to the
gas pipe, water pipe, telephone wire or other
makeshift systems.
- E
nglIsh
- Operator's manual TBE 155

Publicidad

loading