Maintenance - Mondolfo Ferro TBE155 Manual De Uso

13) Move the tool holder arm to its non-
working position and completely close the
turntable clamps being careful to support the
wheel to keep it from falling.
WARNING
This operation can be extremely dangerous!
Perform it manually if you are absolutely
certain you can maintain the wheel equilib-
rium only.
For heavy, large sized wheels you MUST use a
suitable lifting device.
14) Move the platform to move the wheel away
from the turntable.
15) Remove the wheel.
WARNING
Do not inflate the tyre with the wheel still
mounted on the turntable.
Tyre inflation is dangerous and should only
be done by removing the wheel from the
turntable and placing it inside a safety
cage.
64

MAINTENANCE

WARNING
MONDOLFO FERRO declines all liability for
claims derived from the use of non-original
spare parts or accessories.
WARNING
Unplug the machine from the socket and
make sure that all moving parts have been
locked before making any adjustments or
maintenance work.
WARNING
Do not remove or modify any part of this
machine (except for assistance).
WARNING
Before removing unions or pipes, make sure
that the fluids are not pressurised.
If pressurised oil escapes, it can cause seri-
ous injury.
CAUTION
Keep the working area clean.
Do not use pressurised water jets to wash
the machine.
You are strongly advised not to use compressed
air to clean moving components.
When cleaning, take care not to create and
raise dust as far as possible.
For perfect operation and greater duration
of your tyre changer, following these instruc-
tions carefully:
1) Clean the following parts with diesel oil
and lubricate:
- the various joints on the turntable
- the tool holder arm guide
- the carriage guide plate
2) Grease the turntable holder arm lifting
cylinder and arm joint periodically using the
grease nipples (see fig. 39).
Use ordinary lubricating grease.
- Operator's manual TBE 155
- E
nglIsh