Publicidad
Idiomas disponibles
Idiomas disponibles
2. General Safety Rules
h) Keep handles and grasping surfaces dry, clean and free from oil and
h) Keep handles and grasping surfaces dry, clean and free from oil and
h) Keep handles and grasping surfaces dry, clean and free from oil and
grease. Slippery handles and grasping surfaces do not allow for safe handling and
grease. Slippery handles and grasping surfaces do not allow for safe handling and
grease. Slippery handles and grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
control of the tool in unexpected situations.
control of the tool in unexpected situations.
5) Service
5) Service
5) Service
a)
a)
a)
identical replacement parts. This will ensure that the safety of the power tool is
identical replacement parts. This will ensure that the safety of the power tool is
identical replacement parts. This will ensure that the safety of the power tool is
maintained.
maintained.
maintained.
6) Safety instructions for reciprocating saws
6) Safety instructions for reciprocating saws
6) Safety instructions for reciprocating saws
a) Hold the power tool by insulated gripping surfaces, when performing
a) Hold the power tool by insulated gripping surfaces, when performing
a) Hold the power tool by insulated gripping surfaces, when performing
an operation where the cutting accessory may contact hidden wiring or its
an operation where the cutting accessory may contact hidden wiring or its
an operation where the cutting accessory may contact hidden wiring or its
own cord. Cutting accessory contacting a "live" wire may make exposed metal
own cord. Cutting accessory contacting a "live" wire may make exposed metal
own cord. Cutting accessory contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the operator an electric shock.
parts of the power tool "live" and could give the operator an electric shock.
parts of the power tool "live" and could give the operator an electric shock.
b) Use clamps or another practical way to secure and support the work-
b) Use clamps or another practical way to secure and support the work-
b) Use clamps or another practical way to secure and support the work-
piece to a stable platform. Holding the workpiece by hand or against your body
piece to a stable platform. Holding the workpiece by hand or against your body
piece to a stable platform. Holding the workpiece by hand or against your body
leaves it unstable and may lead to loss of control.
leaves it unstable and may lead to loss of control.
leaves it unstable and may lead to loss of control.
Residual risks
Residual risks
Residual risks
Even when the power tool is used as prescribed it is not possible to eliminate
Even when the power tool is used as prescribed it is not possible to eliminate
Even when the power tool is used as prescribed it is not possible to eliminate
all residual risk factors. The following hazards may arise in connection with the
all residual risk factors. The following hazards may arise in connection with the
all residual risk factors. The following hazards may arise in connection with the
power tool's construction and design:
power tool's construction and design:
power tool's construction and design:
Damages to health resulting from vibration emission if the power tool is being
Damages to health resulting from vibration emission if the power tool is being
Damages to health resulting from vibration emission if the power tool is being
used over longer period of time or not adequately managed and properly main-
used over longer period of time or not adequately managed and properly main-
used over longer period of time or not adequately managed and properly main-
tained.
tained.
tained.
WARNING!
active or passive medical implants. To reduce the risk of serious or fatal injury, we
recommend persons with medical implants to consult their physician and the
medical implant manufacturer before operating this machine.
135
FR
ES
PT
IT
PL
UA
RO
GR
EN
-
Publicidad
