Dexter 750JS3-100.5 Manual De Instrucciones página 137

3. Additional safety regulations
performing an operation where the cutting tool may contact hidden wiring performing an operation where the cutting tool may contact hidden wiring performing an operation where the cutting tool may contact hidden wiring performing an operation where the cutting tool may contact hidden wiring
or its own power cord. Contact with a "live" wire will also make exposed metal or its own power cord. Contact with a "live" wire will also make exposed metal or its own power cord. Contact with a "live" wire will also make exposed metal or its own power cord. Contact with a "live" wire will also make exposed metal
parts of the power tool "live" and shock the operator. parts of the power tool "live" and shock the operator. parts of the power tool "live" and shock the operator. parts of the power tool "live" and shock the operator.
Model
Rated voltage /frequency
Rated power
Stroke per minute
Max. cutting thickness in steel
Max. cutting thickness in wood
Dimension units of the tool（cm）
Work model-vibration emission value a(m/s²)
Declaration and verification of noise emission
values dB(A)
Vibration information Vibration information Vibration information Vibration information
The declared vibration total value has been measured in accordance with a standard The declared vibration total value has been measured in accordance with a standard The declared vibration total value has been measured in accordance with a standard The declared vibration total value has been measured in accordance with a standard
test method and may be used for comparing one tool with another. The declared test method and may be used for comparing one tool with another. The declared test method and may be used for comparing one tool with another. The declared test method and may be used for comparing one tool with another. The declared
vibration total value may also be used in a preliminary assessment of exposure. vibration total value may also be used in a preliminary assessment of exposure. vibration total value may also be used in a preliminary assessment of exposure. vibration total value may also be used in a preliminary assessment of exposure.
WARNING!
ways in which the tool is used; and of the need to identify safety measures to
that the vibration emission during actual use of the power tool
750JS3-100.5
220-240V~50Hz
750W
0-3000/min
10 mm
100 mm
24*7.5*21 cm
a
=7.9m/s²
h,B
a
=8,8m/s²
h,M
K=1.5 m/s²
L =95dB(A)
PA
K =3dB(A)
PA
L =106dB(A)
WA
K =3dB(A)
WA
137
FR
ES
PT
IT
PL
UA
RO
GR
EN