Publicidad
Idiomas disponibles
Idiomas disponibles
FR
7. Maintenance
ES
PT
IT
parts. They contain chemicals that can damage, weaken or destroy the
housing, thus compromising the integrity of the double insulation.
PL
a)
UA
Regularly inspect all mounting screws and ensure that they are properly
RO
tightened. Should any of the screws be loose, tighten them immediately.
Failure to do so could result in serious injuries.
GR
b)
The motor unit winding is the very "heart" of the power tool. Exercise due care
EN
to ensure the winding does not become damaged and/or wet with oil or water.
c)
The motor employs carbon brushes which are consumable parts. Since an
excessively worn carbon brush could result in motor trouble, replace the carbon
brush with an identical part when it becomes worn to or near the limit. In
addition, always keep carbon brushes clean and ensure that they slide freely
with in the brush holder
d)
This supply cord is type X attachment, method of attachment of the supply cord
such that any replacement is intended to be made by the manufacturer, its
If a set of spare carton brush is included in this package for replacement
purposes. The check and replacement of the brushes should only be performed
double insulation. To assure the safety of our customers, we strongly recom-
mend against the consumers checking and changing the brushes.
Under normal usage, the carbon brushes will last beyond the 90 day warranty
period. Therefore, do not open the body housing within 90 days of purchase to
inspect the brushes or the manufacturer warranty will void at that time, please
see warranty section if a return is necessary.
WARNING!
products penetrating oils, etc. Come in contact with plastic
Inspecting the mounting screws
Maintenance of the motor
Inspection the carbon brushes
Maintenance the supply cord
140
Publicidad
