Stihl TS 700 Manual De Instrucciones página 45

Definitions
1 Fastener
For removing filter cover to permit
filter to be cleaned.
2 Filter Cover
Covers and protects the air filter
element.
3 Fuel Pump
Provides additional fuel feed for a
cold start.
4 Starter Grip
The grip of the pull starter, for
starting the engine.
5 Carburetor Adjusting Screws
For tuning the carburetor.
6 Fuel Filler Cap
For closing the fuel tank.
7 Water Attachment
For connection of water supply for
wet cutting.
8 Tensioning Nut
For tensioning the ribbed belt.
9 Guard
Guards the wheel and deflects
sparks, dust, cutting debris or wheel
fragments.
10 Adjusting Lever
To adjust the wheel guard in a way
that sparks, dust, cutting debris or
wheel fragments are directed away
from the operator.
11 Abrasive Wheel
Can either be a composite abrasive
wheel or a diamond abrasive wheel.
TS 700, TS 800
12 Front Thrust Washer
Distributes clamping pressure of
mounting nut evenly over cutting
wheel.
13 Muffler
Reduces engine exhaust noises
and diverts exhaust gases away
from operator.
14 Spark Arresting Screen
Designed to reduce the risk of fire.
15 Front Handle
Handlebar for the left hand of the
power tool.
16 Decompression Valve
Releases compression pressure to
make engine starting easier - when
activated.
17 Cap for Spark Plug Boot
The Spark Plug Boot connects the
spark plug with the ignition lead.
18 Choke Lever
Eases engine starting by enriching
mixture.
19 Control Lever
For starting throttle, run and stop.
Keeps the throttle partially open
during starting and switches off the
ignition to stop the engine.
20 Throttle Trigger
Controls the speed of the engine.
21 Throttle Trigger Lockout
Must be depressed before the
throttle trigger can be activated.
22 Rear Handle
The support handle for the right
hand.
Clutch
Couples engine to the belt pulley
when engine is accelerated beyond
idle speed. (Not illustrated)
Belt Pulley
The wheel that drives the ribbed belt
and the abrasive wheel. (Not
illustrated)
Anti-Vibration System
The anti-vibration system includes a
number of anti-vibration elements
designed to reduce the
transmission of vibrations created
by the engine to the operator's
hands. (not illustrated)
English
43