Positioning The Vehicle On The Rear Support Stand; Positioning The Vehicle On The - APRILIA RS 125 Tuono 2003 Manual Del Usuario

RS 125 Tuono_Ing_book_my03.book Page 47 Tuesday, April 29, 2003 3:11 PM
POSITIONING THE VEHICLE ON
THE REAR SUPPORT STAND
N Screw and tighten the pin (1)
the appropriate seat on the rear fork.
Have someone help you keep
the vehicle in vertical position
with the two wheels on the ground.
N Make the two housings on the stand (2)
coincide with the two pins (1) provided
on the vehicle.
N Rest one foot on the rear part of the
stand (3).
N Push the stand (3) downwards until it re-
aches the end of its stroke (see figure).
POSITIONING THE VEHICLE ON
THE FRONT SUPPORT STAND
in N Position the vehicle on the appropriate
rear support stand , see beside (PO-
SITIONING THE VEHICLE ON THE
REAR SUPPORT STAND
N Insert the two ends of the stand (4) in the
two holes (5) positioned on the lower
ends of the front fork.
N Rest one foot on the front part of the
stand (6).
N Push the stand (6) downwards until it re-
aches the end of its stroke (see figure).
).
use and maintenance RS 125 Tuono
47