Mennekes AMEDIO Professional 22 Manual De Instrucciones Y De Instalación página 66

3.6 LED information panel
The LED information panel shows the operating
status of the product (standby, charging, wait time,
fault).
Standby
Symbol Meaning
lights up The product is ready for use. No
vehicle is connected to the product.
flashes Start charging process.
n Authorisation has occurred. No
vehicle is connected to the product.
n Authorisation has not occurred. A
vehicle is connected to the product.
Colour of the symbol (dependent on the configura-
tion)
Charging
Symbol Meaning
lights up Charging in progress.
flashes Overtemperature warning. Charging in
progress. The charging current is re-
duced to avoid overheating and shut-
ting down the product.
pulsates Charging process paused. All require-
ments for charging a vehicle are met.
The charging process is paused due to
a vehicle feedback or was terminated
by the vehicle.
Colour of the symbol (dependent on the configura-
tion)
10
Wait time
Symbol Meaning
lights up n The charging process was ended on
the product. Wait for confirmation
from the vehicle.
n Waiting for authorisation.
flashes The charging process has finished. Re-
move the charging cable.
Colour of the symbol: white
Fault
Symbol Meaning
lights up There is a fault that is preventing the
or vehicle from charging.
flashes
1 "9 Troubleshooting" [
Colour of the symbol: red
3.7 Charging connections
The product variants are available with the follow-
ing charging connections:
Type 2 charging socket with hinged lid for use
with separate charging cable
This can be used to charge all vehicles with a type
2 or type 1 charging plug (depending on the char-
ging cable used).
45]
}