Mennekes AMEDIO Professional 22 Manual De Instrucciones Y De Instalación página 70

Idiomas disponibles

Installation

Select location

Requirement(s):

ü Technical data and mains data are the same.

1 "4 Technical data" [} 12]

ü Permissible ambient conditions are observed.

ü The product and the charging station are in suf-

ficient proximity to each other, depending on

the length of the charging cable used.

ü The minimum clearances to other objects (e.g.

walls) must be complied with.

1 "5.1.2 Minimum distances" [} 15]

ü Connection to a backend system: The mobile

network is fully available at the location.

ü If several products are to be networked, they

must be in sufficient proximity to each other.

The length of an Ethernet cable must be no

longer than 100 m.

5.1.1 Permissible ambient conditions

Risk of explosion and fire

If the product is operated in potentially explosive

areas (ex areas), explosive substances may be ig-

nited by sparking of product components. There is

a risk of explosion and fire.

u Do not use the product in potentially explosive

atmospheres (e.g. gas filling stations).

Material damage due to unsuitable ambient con-

Unsuitable ambient conditions can damage the

u Protect the product from a direct water jet.

u Do not install the product in areas prone to

u Ensure adequate ventilation of the product. Ad-

here to minimum distances.

u Keep the product away from heat sources.

u Avoid large temperature fluctuations.

Permissible ambient conditions

Ambient temperature [°C]

Average temperature over 24

Altitude [m above sea level]

Relative humidity (non-con-

densing) [%]