Publicidad
Idiomas disponibles
Idiomas disponibles
1
2
Fig. 14: Connections on the ECU
Item Usage
1
SIM card
u Use the slot on the left-hand
ECU (AF1).
2
Configuring the product
u Use the connection on the
right-hand ECU (AF2).
6.4
Inserting the SIM card
The tasks described in this section may only
be carried out by a qualified electrician.
Only valid for the product variants with modem.
ATTENTION
Material damage due to electrostatic discharge
The SIM card can be damaged due to electrostatic
discharge.
u Touch a grounded metal part before touching
the SIM card.
u Attach the sticker (included in the delivery con-
tents) to the SIM card. To do this, follow the in-
structions on the sticker.
u Remove the left-hand ECU (AF1).
1 "6.5 Removing the ECU" [} 24]
24
u Insert SIM card in the micro SIM slot of the left-
hand ECU (AF1).
1 Follow the instructions "Insert SIM card into the
AMEDIO® charging station".
u Install the left-hand ECU (AF1).
6.5
Removing the ECU
The SIM card can be removed, for example in order
to insert the SIM card or inspect the type plate of
the ECU.
Connec-
tion / slot
Micro-SIM
Micro-
USB
Fig. 15: Removing the left-hand ECU
u Loosen the locking bolts (3).
n On the left-hand ECU, the locking bolts must
n On the right_hand ECU, the locking bolts
u Pull the ECU (1) off the rail (2).
u Loosen the connector on the ECU.
Installing the ECU
u Connect the connector to the ECU.
u Slide the ECU onto the rail.
u Tighten the locking bolts.
n On the left-hand ECU, the locking bolts must
n On the right-hand ECU, the locking bolts
1
be pushed to the left.
must be pushed to the right.
be pushed to the right.
must be pushed to the left.
2
3
Publicidad
