Publicidad
Idiomas disponibles
Idiomas disponibles
u Click the button "Operator Default & Restart" to
restore the factory settings and restart the
product.
6.13 Testing the product
The tasks described in this section may only
be carried out by a qualified electrician.
u At initial start-up, test the product in accordance
with IEC 60364-6 and the applicable national
regulations (e.g. in Germany: DIN VDE
0100-600).
The test can be carried out in conjunction with the
MENNEKES test box and standard-compliant test
equipment. The MENNEKES test box simulates
vehicle communication. Test boxes are available as
an accessory from MENNEKES.
6.14 Closing the product
The tasks described in this section may only
be carried out by a qualified electrician.
MENNEKES recommends using pedestal
filler (e.g. expanded clay, 4 mm... 8 mm
grain size, approx. 5 litres) for protection
against humidity and insects.
ATTENTION
Material damage due to crushed components or
cables
Damage and malfunctions can occur due to
crushed components or cables.
u When closing the product ensure that compon-
ents or cables are not crushed.
u Fix components or cables in place if necessary.
u Fit the front panel into the housing from above.
u Close the clamping devices.
u Push the cover onto the product from the side.
u Turn the key anti-clockwise to close the cover.
36
u Keep the key out of reach of unauthorised per-
sons.
Publicidad
