Publicidad
Idiomas disponibles
Idiomas disponibles
REPLACING PARTS
To carry out this operation, proceed as follows.
Turn off the gas supply tap.
1)
Open the hatch (A).
2)
EQUIPMENT DECOMMISSIONING, DEMOLITION AND DISPOSAL
NOTE: Read the following section of
the "user instruction manual" carefully be-
fore replacing any part:
– Hazards and safety provisions during decom-
missioning.
When decommissioning the appliance, a series
of procedures must be carried out to ensure
that the appliance and its components are not
a hindrance and are not easily accessible.
To ensure that the appliance cannot constitute
hazards for people or the environment, all ener-
gy sources (electricity, etc.) must be disconnect-
ed and rendered unusable, and any liquids pre-
sent must be drained (lubricants, fl uids, etc.).
3269860_inst_GB_rev.2
REPLACEMENT IGNITION UNIT
A
Undo the screws (B) and replace the ignition
3)
unit (C).
Close the hatch (A).
4)
C
B
Place the appliance in a suitable area which is
not easily accessible, with barriers to prevent
anyone from accessing it.
When scrapping, sort all components by chem-
ical characteristics and dispose of them sepa-
rately in accordance with the relevant legal re-
quirements.
IMPORTANT: Do not dump non-bio-
degradable products, lubricating oils, and
non-metallic components (rubber, PVC, re-
sins, etc.) in the environment. Dispose of
them in compliance with the relevant laws.
ENGLISH
17
Publicidad
