Angelo Po 0N1FR1I Manual De Uso página 46

ENGLISH
Lighting
Operate the appliance's master switch to con-
1)
nect it to the electrical mains.
Turn on the gas supply tap.
2)
Turn the knob (A) clockwise (pos.1) to turn
3)
the gas and power supply on and off .
– The Green light (C) come on.
– The Orange light (D) come on. The Orange light
(D) comes on to indicate that the oil is not at
the working temperature. The light goes out
when the temperature is reached.
Turning off
Turn the Knob (A) anticlockwise (pos. 2) in
1)
order to disconnect the electric power supply
and to switch off the burner.
– The Green light (C) go out.
Turn off the gas supply tap.
2)
Cut off the mains electricity supply using the
3)
appliance's master switch.
IMPORTANT: Before proceeding, let
the oil cool down to the environment tem-
perature or allow for the appliance to cool
for about 15 min., so that the oil reaches a
temperature between 50÷120 and use suit-
able PPE to prevent scalds.
Open the hatch (A).
2)
Fit the extension (B) onto the tap (C).
3)
Place the container (D) and the fi lter (E), both
4)
available as optionals, underneath the exten-
sion (B).
Turn on the tap (C) to empty the well.
5)
Turn off the tap (C) on completion of the op-
6)
eration.
Close the hatch (A).
7)
WARNING: Do not dump oil in the
environment; dispose of it in accordance
with the laws in force in the country of use.
20
SWITCHING THE APPLIANCE ON AND OFF
FILTERING OIL
USE AND OPERATION
A
A
C
B
3269860_ut_GB_rev.2
A
D C
1
2
C
E
D