Angelo Po 0N1FR1I Manual De Uso página 36

ENGLISH
HAZARDS AND SAFETY PROVISIONS DURING SERVICING
During servicing, watch out for the following hazards and provide for the countermeasures
indicated below:
► Source of hazard: appliance mechanics
Hazard
Risk of cutting
due to sharp
edges
► Source of hazard: risk generated by materials/substances
Hazard
Unburned gas
leak
Dangerous burnt
gas emissions
Dangerous burnt
gas emissions
► Source of hazard: risks associated with the environment in which the appliance is used
Hazard
Presence of satu-
rated steam
10
Where or in which situations
does the hazard occur?
When handling sheet-
metal parts
Where or in which situations
does the hazard occur?
Gas valve leak
Incorrect adjustment of
the gas system, incorrect
injector and/or primary
air adjustment
Blocked fl ue
Where or in which situations
does the hazard occur?
Condensation and drip-
ping on electrical and gas
parts
Countermeasures
• Pay special care during
this activity
• Wear personal protective
equipment in accordance
with safety regulations
Countermeasures
• Periodic servicing of the
appliance gas system, to
be carried out only by ex-
pert technicians of an au-
thorised customer service
• Periodic servicing of the
appliance gas system, to
be carried out only by ex-
pert technicians of an au-
thorised customer service
• Periodic servicing of the
appliance gas system, to
be carried out only by ex-
pert technicians of an au-
thorised customer service
Countermeasures
• Periodic servicing of the
appliance gas and elec-
tric system, to be carried
out only by expert tech-
nicians of an authorised
customer service
SAFETY
Safety device
None
Safety device
Safety device
None
3269860_ut_GB_rev.2