Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
HAZARDS AND SAFETY PROVISIONS DURING APPLIANCE DECOMMISSIONING
When decommissioning the appliance, watch out for the following hazards and provide for
the countermeasures indicated below:
► Source of hazard: Electric power
Hazard
Risk of electric
shock caused by
live components
► Source of hazard: Handling of heavy loads Source of hazard:
Where or in which situations
Hazard
does the hazard occur?
Risk of injury
When the appliance
due to body
moves
overload
► Risk generated by materials/substances
Hazard
C o n c e n t r a t i o n
of unburned gas
emissions due to an
incorrect appliance
decommissioning
12
Where or in which situations
does the hazard occur?
• On the power cable
• Under protective panels
• Under the control panel
• Under protection covers
Where or in which situations
does the hazard occur?
During appliance decom-
missioning
Countermeasures
• Operations to the electric
system may be carried out
by authorised and quali-
fi ed staff only, in accordan-
ce with the relevant appli-
cable laws.
• Specialist procedure
• Turn off the power supply
before removing the covers
• Secure it to prevent acci-
dental switching on
• Ensure that there is no vol-
tage
Countermeasures
• Use a suitable lifting de-
vice
• observe the limit values
for lifting and transport
• Wear personal protective
equipment
Countermeasures
Decommissioning opera-
tions must be carried out
by qualifi ed personnel
SAFETY
Safety device
• Protection
panels
• System
switch-di-
sconnector
Safety device
• Protective gloves
• Protective shoes
• Safety helmet (e.g.
for
suspended
loads,
overhead
operations...)
Safety
device
None
3269860_ut_GB_rev.2
Publicidad
