Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Even if the equipment has all its safety devices,
if necessary, during the installation and connec-
tion other safety devices may be supplemented
in accordance with applicable laws.
The illustration shows the position of the de-
vices.
Gas supply tap: for turning the connection
A)
to the gas supply line on and off .
Combustion control unit: cuts off the gas
B)
supply if the fl ame goes out.
Safety thermostat: cuts off the gas supply in
C)
case of overheating.
WARNING: Make a daily check that
the safety devices are properly installed
and in good working order.
The illustration shows the position of the signs
provided.
Nameplate with manufacturer and appli-
A)
ance data.
WARNING: read the manual carefully
B)
before carrying out any procedure.
WARNING: when washing the appli-
C)
ance do not point pressurised water jets at
internal parts.
WARNING: all relevant regulations
D)
must be complied with. "Install in compli-
ance with the relevant regulations and use in
well ventilated premises only".
WARNING: all relevant regulations
E)
must be complied with. "No liability is ac-
cepted in case of failure to comply with the
installation and commissioning instructions".
4
SAFETY DEVICES
SAFETY AND INFORMATION SIGNS
C
B
C
B
E
D
C
B
G
A
WARNING: watch out for hot sur-
F)
faces.
CE marking: this indicates that the
G)
equipment is compliant with all relevant laws
applicable to the product.
SAFETY
0*1FR1I
0*1FR7I
A
1*1FR2I
A
F
37M3202
3269860_ut_GB_rev.2
Publicidad
