Publicidad
Idiomas disponibles
Idiomas disponibles
To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Pull off the knob (A).
3 - Undo the screws (C) and remove the control
panels (B).
4 - Remove the pipe (D).
5 - Remove the nozzle (E) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
6 - Replace the pipe (D), the control panels (B) and
the control knobs (A).
Important
This operation must be carried out by
skilled operatives in compliance with the le-
IT
gal requirements with regard to safety at
work. Never dump non-biodegradable ma-
GB
terials, lubricating oils and non-metallic
DE
FR
ES
English
REPLACING THE TOP BURNER PILOT LIGHT NOZZLE
DECOMMISSIONING THE APPLIANCE
C
A
C
B
components (rubber, PVC, resins, etc.) in
the environment. Dispose of them in ac-
cordance with the relevant legal require-
ments.
- 22 -
D
E
10
IDM-39612102400.tif
Publicidad
