Angelo Po 12WFAAA Manual De Uso E Instalación página 33

SWITCHING THE TOP BURNER ON AND OFF
Lighting
1 - Turn on the gas supply tap.
2 - Press the knob (B) and turn it anti-clockwise
(pos. 1), while keeping button (A) pressed, to
light the pilot light.
3 - Keep the knob pressed for about 15 sec. to
prime the thermocouple.
4 - Turn the knob anti-clockwise (pos. 2) to light the
burner.
5 - Turn the knob gradually anti-clockwise to adjust
the power of the flame down to the minimum
setting.
Turning off
1 - Turn the knob clockwise (pos. 3) to turn the
burner off. The pilot light will remain on to allow
the burner to be re-lit.
2 - Turn the knob clockwise (pos. 4) to turn off the
pilot light.
3 - Turn off the knob to ensure safety.
SWITCHING THE HOT CUPBOARD ON AND OFF
Lighting
Important
At first switch-on, preheat as appropriate.
1 - Turn on the appliance's circuit breaker to con-
nect it to the electrical mains.
C
2 - Turn knob (C) clockwise (pos. 1) from minimum to
maximum and wait for the pre-heating period to
expire before using the hot cupboard. See table.
Note:The power (D) and temperature (E) indicators
light up.When the hot cupboard has reached the
set temperature, the temperature indicator (E)
turns off.
1
2
- 9 -
1
2
3
4
IDM-39612100500.tif
C
D
E
IDM-39612500600.tif
B
A
IT
GB
DE
FR
ES
English