Publicidad
Idiomas disponibles
Idiomas disponibles
Before First Use
Use below information to help with the fi rst time set up.
Note: Please remove red plug from water reservoir before fi rst use.
1. Wash & Dry Parts
Wash the Milk Jug, Filter Baskets,
Portafi lter, Bean Hopper, Top Burr,
Tamper and Water Reservoir in
warm water with a mild detergent.
Rinse and allow thorough air
drying.
5. Insert & Set Bean Hopper
Insert & turn Hopper to set Grind Setting. As a
starting point try Grind Setting 15.
Note: For further Grind Setting adjustment see Extraction Guide.
7. Prime Machine
TWO CUP
Insert Two Cup Filter
Insert Portafi lter into
Basket into Portafi lter.
Group Head, turn to
center.
Note: Turning Portafi lter might be tight for fi rst few uses.
BVSTEM7400_23SEM1 (LA)_SPA/ENG.indd 8
BVSTEM7400_23SEM1 (LA)_SPA/ENG.indd 8
2. Insert Top Burr
3. Drip Tray & Accessories Storage Tray
Use the handle to in-
Assembly of drip tray and accessory tray
sert Top Burr, rotating
into position.
clockwise to lock.
GRIND
SETTING
Fill with roasted coffee
beans.
INSERT
2. TURN
1. ALIGN & INSERT
Press TWO CUP
BUTTON. Allow water
to run through until it
stops.
English - 8
4. Start Up
Plug in at socket. Flick
power switch downwards,
the switch will return
to centre. Indicator light
will pulse during heat up.
6. Remove Red Plug, and set up Water Reservoir
Remove the red plug at the bottom of the water
reservoir and safely discard. Place the charcoal
fi lter into the holder and insert it into the reservoir.
Fill reservoir with water and install.
Turn DIAL to STEAM
and run for 20 sec.
2023/11/7 10:38
2023/11/7 10:38
Publicidad
