Publicidad
Idiomas disponibles
Idiomas disponibles
CARE AND CLEANING – GRINDER
• Cleaning & Unblocking Bottom Burr and Grind
Chamber
- Use the Cleaning Brush or a Vacuum Cleaner
to thoroughly clear the parts and surfaces in the
Grind Chamber of fine coffee grinds. A damp cloth
can be used to wipe the inside of the Grind Collar.
- Allow thorough air drying.
CAUTION: Do not pour water or any other liquid
into the Grind Chamber.
• Cleaning & Unblocking Grind Outlet
- Feed the Cleaning Brush up into the Grind Outlet
from below, wiping & brushing the inside surfaces.
- If the Grind Outlet is clear the bristles will be
visible inside the Grind Chamber.
• Replace Top Burr
- Identify the locking fixtures on the underside of
the Top Burr, underneath the moulded padlock
symbols.
- Using the handle insert the Top Burr into the
Grinder Collar, ensuring locking features align.
BVSTEM7400_23SEM1 (LA)_SPA/ENG.indd 33
BVSTEM7400_23SEM1 (LA)_SPA/ENG.indd 33
- Rotate the Top Bur approximately 30 degrees
clockwise to lock, the burr should click into
position.
- When correctly seated, the Top Burr will be flush
with the surface of the Grinder Collar.
Replace Bean Hopper
- Ensure the Hopper Guide is aligned, and the tab
on the Hopper base locates into the cut-out on the
rear of the housing.
- Align & insert the Bean Hopper into the Grinder
Collar and firmly pushing down turn clockwise to
lock into place and open the Hopper Guide.
- Reset to the Grinder Setting noted prior to
cleaning.
- Refill the Bean Hopper with coffee beans.
1. ALIGN HOPPER GUIDE
Note: We strongly advise not to use Torrefacto
style coffee beans in your PERFECT BREW
MÁXIMA Espresso Maker. Due to the high sugar
content, the burr grinder assembly will quickly
clog.
English - 33
2. INSERT
3. TURN
2023/11/7 10:38
2023/11/7 10:38
Publicidad
