Publicidad
Idiomas disponibles
Idiomas disponibles
FINE TUNING YOUR ESPRESSO
- The machine will beep and the grind icon will
pulse, and one of the following options will be
displayed:
a. If this is the first time the Perfect Brew Máxima
Espresso Maker machine is being adjusted away
from factory settings then the Extraction Timer (9)
will display '0'.
b. If the Perfect Brew Máxima Espresso Maker
machine has previously been adjusted from
factory settings, then that figure will be displayed
instead. The numbers -9 to 9 nominally represent
a range of adjustment possible for the grinder.
Adjusting the number further towards -9 will
decrease the volume of coffee grounds being
dispensed for all grind settings (0-30), and
increasing the number further towards 9 will
increase the volume of coffee grounds being
dispensed for all grind settings (0-30).
- Once the correct adjustment has been made press
the manual button, the Perfect Brew Máxima
Espresso Maker machine will beep once, and the
adjusted timings will be saved.
BVSTEM7400_23SEM1 (LA)_SPA/ENG.indd 25
BVSTEM7400_23SEM1 (LA)_SPA/ENG.indd 25
Customisable – Grinder Recalibration
As the burrs on your grinder wear, the gap between
the burrs will increase slightly, this will cause the
size of your grounds to increase slightly, which
could cause your espresso to under extract. If this
becomes an issue you may wish to recalibrate your
grinder. To do this:
- Starting from the READY state,
press and hold the manual brew
button for 3 seconds whilst pushing
down on the portafilter handle at the
same time.
- The machine will beep and the grind
icon will begin to pulse, and the
current Grind setting position will be
shown on the display.
English - 25
PUSH
PUSH
DOWN
PUSH
DOWN
PUSH
DOWN
PUSH
DOWN
PUSH
DOWN
DOWN
2023/11/7 10:38
2023/11/7 10:38
Publicidad
