Oster BVSTEM7400 Manual De Instrucciones página 53

TROUBLESHOOTING GUIDE
PROBLEM
Coffee grinds
are coarse when
on a fine Grind
Setting
Grind Setting
cannot be
adjusted
Bean Hopper
cannot be locked
into position
Top Burr does
not sit in the
Grinder Collar
correctly
Grinder burrs
have small spots
and marks
BVSTEM7400_23SEM1 (LA)_SPA/ENG.indd 16 BVSTEM7400_23SEM1 (LA)_SPA/ENG.indd 16
Possible cause
Grind Setting not correct.
Top Burr not seated correctly. Coffee beans
or grinds are caught around & under the
Top Burr.
Grinder Calibration needs resetting.
The Bean Hopper is not seated correctly.
Coffee beans or grinds are caught around the
Top Burr or Grinder Collar.
Grinder Collar not aligned to the Top Cover.
Coffee beans or grinds are caught in the Top
Burr or Grinder Collar.
The Top Burr is not seated correctly.
Coffee beans or grinds are caught around &
under the Top Burr.
The Top Burr is not seated correctly.
These are part of the hardening process (for
extra-long life). These marks do not affect the
performance of the Grinder or the taste of the
espresso.
English - 16
What to do
Adjust the Grind Settings by turning the Bean
Hopper. See Tips for Grinding, & Extraction.
Top burr needs removing and the areas cleaning,
before reinstalling.
See Grinder Recalibration.
Remove the Bean Hopper & reinstall.
Remove the Bean Hopper & Top Burr. Use the
Cleaning Brush or Vacuum Cleaner as necessary
to clear loose coffee beans or grinds.
Ensure markings on Top Cover and Grinder are
lined up.
Remove the Bean Hopper & Top Burr. Use the
Cleaning Brush or Vacuum Cleaner as necessary
to clear loose coffee beans or grinds.
Make sure the Top Burr is correctly aligned and
that the handle is folded down.
Remove the Top Burr and replace the Bean
Hopper. Hold the Bean Hopper down with your
hand, do not turn. Insert the Portafilter into the
Grinding Cradle and push down to activate the
Grinder. The coffee grinds will fall out the Grind
Outlet.
Make sure the Top Burr is correctly aligned and
that the handle is folded down.
No action needed.
2023/11/7 10:38 2023/11/7 10:38